The E-Z Set punch head provides quick turn-of-the-wrist adjustment. You can achieve just the right mark or form when using the punch head on 1/2" A station or 1-1/4" B station stamping and forming tools. Trial and error is streamlined. Costly machine down time for tool adjustment is converted into productive machine up time.
Each adjustment click provides a .0035" [0.09mm] incremental change in the tool length. The maximum adjustment is approximately .125" [3.18mm]. A simple lift and turn of the adjustable head is all that is required. Fine length adjustments can now be made without removing the tool from the turret. You will see instant payback based on reduced machine down time.